Bailey, C, Lane, G, Morrell, S and Staples, P, 2009. What can go wrong in comminution circuit design?, in Proceedings Tenth Mill Operators’ Conference, pp 143–149 (The Australasian Institute of Mining and Metallurgy: Melbourne).
 

Collins, D, Schwarz, S and Alexander, D J, 2009. Designing modern flotation circuits using JKFIT and JKSimFloat, in Recent Advances in Mineral Processing Plant Design, SME, pp 197-201
 

Schwarz, S, Obeng, D and Alexander, D J, 2009. Improving flotation performance in the good, the bad and the ugly economic times – the Century Story, in Proceedings Tenth Mill Operators’ Conference, pp 143–149 (The Australasian Institute of Mining and Metallurgy: Melbourne).
 

Schwarz, S, Gay, S and Alexander, D, 2009. Mass balancing flotation circuits using JKMultiBal, Presented at the SME Annual Meeting, Denver
 

Stark, S, Perkins, T and Napier-Munn, T J, 2008. JK drop weight parameters – A statistical analysis of their accuracy and precision and the effect on SAG mill comminution circuit design, in Proceedings Metallurgical Plant Design and Operating Strategies 2008, pp 147-156 (The Australasian Institute of Mining and Metallurgy: Melbourne).
 

Schwarz, S, Crnkovic, I and Alexander, D, 2008. Flotation Circuit Analysis at Zinifex Century Mine, in Proceedings of the 40thAnnual Meeting of Canadian Mineral Processors, Ottawa, Canada, pp 297-310
 

Schwarz, S, Alexander, D and Coleman, R, 2007. Characteristics of modern copper flotation circuits, in Proceedings of the 6thInternational Copper-Cobre Conference, Toronto, Canada, pp 185-195
 

Harbort, G and Schwarz, S, 2007. Techniques for the optimisation of coal flotation, in Proceedings of the 11thAustralian Coal Preparation Conference, Twin Waters, Qld, pp 36-49
 

Coleman, R G, Urtubia, H E and Alexander, D J, 2006. A comparison of BHP-Billiton’s minera escondida flotation concentrators, in Proceedings 38th Annual Canadian Mill Operators Conference (Canadian Institute Mining, Metallurgy and Petroleum: Ottawa).
 

Alexander, D J, Bilney, T and Schwarz, S, 2005. Flotation performance improvement at Placer Dome Kanowna Belle Gold mine, in Proceedings 37th Annual Canadian Mill Operators Conference, pp 171-201 (Canadian Institute Mining, Metallurgy and Petroleum: Ottawa).